-Windows Experience Index takes 5 minutes to show up in System Properties window
-Windows Live Messenger takes 5 minutes to start
-Network and Sharing Center takes 5 minutes to start
-disabling or enabling a network connection takes 5 minutes to accomplish, BUT ONLY ONCE PER SESSION
-drivers of any kind take 5 minutes to install
-IrfanView takes 10 seconds to start instead of 2
During all this time svchost.exe -k netsvcs hogs the processor, except MSN, where msnmsgr.exe is the CPU hogger. The only cure I’ve found is system restore or uninstalling CFP.
Upon a full CLEAN reinstall of CFP the “Comodo Firewall Miniport” is installed ONLY AFTER THE SYSTEM RESTART. At which point the network firewall reports not to be functioning properly. Install of the Comodo Firewall Miniport may or may not be successful.
If it succeeds:
-CFP Miniport will appear in the device manager under Network Adapters as a visible device, when normally it was hidden from view.
-Windows will freeze just seconds after startup, leaving only the mouse cursor running.
If it does not succeed:
-CFP Miniport will appear in device manager under Network Adapters with an exclamation mark.
-Windows will NOT freeze, and Defense+ alerts will still show up, but not firewall ones.
In BOTH cases of success and failiure CFP will, upon uninstall, leave a Comodo Firewall Miniport in Device Manager with an exclamation mark. The device cannot be removed even after performing a cleanup, neither in safe mode nor elsewhere.
I have run a search on google. There are several other cases exactly like mine which nobody has been able to solve, even after having followed the removal instructions and the batch file on your forums. I urge Comodo to take a look at these cases and acknowledge their existance.
All who’ve reported the issues were using Vista systems. I think the best thing you could do for me right now is provide me with a 32bit debug installer of CFP that’ll log everything that goes right and wrong during install.
Boy, I know you wrote “latest” in all previous posts about issue. The reason i ask is to provide exact version number in report for devs even if it is evident that the matter concerns 3.0.22.349. So there is no concept “latest”.
The issue has occurred to me with both 3.0.21 and 3.0.22, so yes it is happening in 3.0.22.349, trust me I know what I’m talking about. The people who reported on the other forums however, posted since long before this “latest” version so I do believe it is not an issue concerning only 3.0.22 but rather CFP generally on certain Vista configurations.
Thanks for info. Issue may be connected to installer’s behavior described here (my speculation).
Issue was raised and dev team would be aware of it shortly. Hopefully they’ll investigate it (and provide some workaround here). At the meantime i suggest you to raise support ticket: support guys know a lot and hopefully they’ll provide you some useful instructions.
Comodo Firewall Pro 3 on Vista x32 is apparently IN CONFLICT WITH NOD32’S IMON - IMON is the antivirus’ module for checking online traffic for viruses. Uninstall of either NOD32(I use version 2.70.39) or CFP returns functionality back to Windows and cures the list of 5-minute ill-effects mentioned earlier. A note that IMON does NOT have to be active in order to cause conflict.
NOD32 allows disabling of IMON to the level at which CFP allows disabling of D+, that is - it can unload the driver. However, it still leaves it registered in Windows and that alone still causes problems. Fortunately, NOD32 is built on an extremely modular model, so it is easy to “rip out” the module from the AV without stability issues or errors. Note that files are STILL scanned upon download - even before the user accepts said download - so the IMON module is not all that important, but rather an alternative for those who believe their computer is clean and only want to scan what gets into their computers without a real-time scanner - it is redundant.
To rip IMON out of NOD32:
-boot into safe mode
-go into c:\windows\system32 find imon.dll and delete it
-delete pu_imon.dll pu_imon.chm ps_imon.dll from the antivirus folder, and from the \setup\ folder that are located within the AV folder
-restart
The antivirus will appear without said module in the UI and function perfectly normal, including updates.
Uninstall of NOD32’s IMON is necessary on problematic systems before the install of CFP in order to prevent:
-the install of CFP Miniport(s) after the install has completed and the system has been restarted
-leaving unremovable phantom CFP Miniports during uninstall
I have NOT however tested to see if removal of IMON makes the removal of the infamous CFP Miniports possible, but it certainly prevents them from being created. I don’t intend to test it either. It’s fixed, GOOD RIDDANCE!
I have additionally, removed DMON(document monitor) and EMON(email monitor) from NOD32 in the same manner. Again NOD32 scans these files when they are created or modified in the first place, so these modules are all but redundantly useless unless the realtime scanner AMON is disabled.
I had trouble uninstalling Comodo after trying to do an update. It was coming up with a framework error during the uninstall and error 112 during the update. Then I remembered that Windows Update had installed some stuff recently, mainly: Security Update for Microsoft .NET Framework, Version 2.0 (KB928365).
Interestingly enough Windows installed this for me, but when I look I only had .NET 1.1 installed, so I uninstalled the above update and suddenly the uninstall program worked again. Microsoft are great.
.NET in general is complete farce and I have had MANY problems with 2.0 in particular resulting in the need to reformat (now MS says I have used up my validations - THE NERVE!). I advise everyone to steer clear of .NET completely as it will probably be the worst PR nightmare in MS history when all is said and done. Thanks for the above as I am about to uninstall CPF and know what to look for…
I’ve recently upgraded to ESET Antivirus 3.0(NOT ESET Smart Security) and I must say it causes the exact same conflict as 2.7. The exact same symptoms are triggered after a while and the network monitor driver has to be removed manually.
This is done from windows:
-open Device Manager and select “Show hidden devices” and look for “epfwtdir”, uninstall and restart
-look for the .sys file with the same name under C:\Windows\System32\Drivers and delete it
-look for the folder with the same name under the AV’s install folder in \Drivers\ and delete it
-open regedit and go to HKLM\SYSTEM\CurrentControlSet\Services for the key with the same name and delete it
-restart
EAV will constantly report that analysis of network protocols is not functioning. EAV will continue to function normally in every other aspect.
I would like for either Comodo or ESET to look into this driver conflict and work out a solution…
If you have no Comodo software installed, it is as simple as searching with regedit for any keys containing Comodo and deleting the deepest folder containing those keys. One catch: you need to run regedit under the System account.
BE CAREFUL FROM NOW ON, YOU MIGHT WANT A REGISTRY BACKUP
Run the batch file and watch a new god mode regedit appear.
Start your hunt for Comodo (and LEGACY) registry entries to delete.
I think the most important ones for me were:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\NT_INSPECTMP
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Enum\Root\NT_INSPECTMP
You may also try to uninstall CF (Comodo Firewall) and delete all CF files left over, then reinstall.
In some other cases users got rid of problem when they
replaced cfpres.dll file on their computer by cfpres.dll provided by someone else working on similar system.
Because of Comodo I cannot use my laptop to connect with my desktop because it won’t let me connect! So I have to disable it and be without any protection at all! Tickets are closed by Comodo without being answered.
The following is from a professional Software architect:
“Any firewall program you cannot uninstall cleanly is one you should absolutely not be using. Turn it off if you can and enable the Windows firewall as I described. Make certain Comodo doesn’t restart the next time you boot the machine.
Another thing you can do is to ask Comodo if there are any services you can disable in the meantime. You would go into ControlPanel->AdministrativeTools->Services to do this. But you have to be careful about what you are disabling.”
I submitted a ticket but support just closes tickets without replying!
So Comodo has actually ruined my laptop. and made it useless…I have read your instructions and they are impossible for someone like me to follow and I would ruin my computer completely. As for a batch file I do not know what that is. I have never heard of a batch file. And I do not have the expertise to mess with the registry.
Is there a way to TURN IT OFF so I can use the Windows firewall while I connect to my desktop from my laptop and not be without protection.? It is necessary for me to be able to connect with my desktop because I am very disabled and it is very painful to sit at the desktop for very long. Comodo is making my desktop useless.
Making double posts doesn’t help Yankee. Follow the steps in the first post of this thread. Complaining doesn’t help when all you need is right in front of you.
Vettetech,
The steps are incomprehensible to someone who is not a professional.
I asked if there was a way to turn it off and use Windows firewall when I connected to my desktop with my laptop. Nobody would answer that. I said I did not know what a batch file is…nobody would answer that either.
I would rather pay for a program than have it free with no support.
All 75 members of my group have been advised to not get Comodo because I would not want them to have all the trouble that it has caused for me.
For heaven’s sake, charge $50, or even more for it, and provide support instead of this mishmash of assorted directions completely lacking in continuity.
Thanks for rendering my new laptop completely useless…why wouldn’t I be upset???
Why dont you ask for help so you can set up your network. That way there your laptop can see your desktop. I am not good at networking but make a thread and someone will help you. You can always run a longer eithenet wire to your laptop when you want o use it. My cousin unplugs his from his desktop to his laptop all the time. You dont need to know what a batch file is. Just click on the attachment and download it. I added to my other post in your other thread. You DO NOT need to be a pro to do this. My 70 year old mother can do this.
