Comodo Internet Security v11.0.0.6606 - RC

Hi All,
Thank you for all the feedback with previous beta version.

Following is release candidate Comodo Internet Security v11.0.0.6606 for your review and feedback:

Online Setup Details:
In order to install online setups, please ensure you have following entries in Windows hosts (c:/windows/system32/drivers/etc/hosts) file:

You can update from previous Beta and also from last production version by defining test server IP as shown in enclosed HostSettings_for_Update.png.

Comodo Internet Security Premium
Size: 5.4M ( 5573320 )
MD5: 9668c6b6da0306606e6dd40f59b96f5e
SHA1: c5aa6fe2cc58fa147a1f9926f8377c3612db87b0

Comodo Antivirus
Size: 5.4M ( 5573312 )
MD5: efbe05850e162ce83e94cc6f83e7ee6b
SHA1: 1e93ff15432502e59062197a83eab004968ec725

Comodo Firewall
Size: 5.4M ( 5573312 )
MD5: 8786ec7fa3814d56619a4c2b1164882d
SHA1: 188002d5dcd7e25e96b97e5b869c80f5d3f5b49e

Offline Setup Details:
Comodo Internet Security Premium (Firewall and Antivirus only)
Size: 71M ( 73460600 )
MD5: 8a6b79e6dd3ec92808b8f2d9aae6e9ed
SHA1: 251252d4a1b20616542967c228b08fa662436ba1

Unless we hear a blocker, this version is expected to go in production on Tuesday, 26th Jun, 2018

Please give it a try and share your valuable feedback.


Hi, umesh.
Could you please provide any updated list?

No changes since last beta.

It is fully tested version ready for release…

Story so far: Last CIS stable bugged after a while during a system hang (or power down), the tray icon didn’t want to appear anymore but trying to dump a log in Task Manager gave 0 byte files, so I figured phuckit, lets try the betas.

Uninstalled everything using your uninstaller, installed the beta from over a month ago (6574?), updated it to 6580, all seemed fine for over a month.

An 6606 update popedup today, updated, restared. No tray icon. Restarted, same thing, trying to run CIS makes the system unresponsive - can’t run a single program and trying to dump a log in Task Manager asked me to wait but did nothing.

Uninstalled everything using your uninstaller, downloaded your offline installer from this post, installed, restarted, same thing - no tray icon, running CIS manually makes everything locked and trying to dump a log in Task Manager asked me to wait but did nothing and I had to reset my pc cause software restarting didn’t do anything.

Restarted, no tray icon, didn’t do anything and went on here to write this post, CIS message just appreared that it detected a crash and wants me to sent a report but since I’ve got a way too slow connection might as well 7zip these files and up them on mega along with Taks Manager’s dump files…

  • uploading dump files in progress *

files uploaded here

Looking forward for dump files.

Done, link in previous post.

Thanks, we will have a look.

Can you please also try to see if going back to previous beta still gives you stable experience?

I’ll check tomorrow if I have some free time.

Got it, thanks. :slight_smile:

This one still runs up very file in file rating file list as unrecognized like the beta did.

Just upgraded to this RC version and I spotted a bug.
I launched a scan of my C: drive (via context menu) and after 25% I choose “Send to background” and the scan practically disappeared. Where should I find it? I don’t think this is the expected behaviour.

Hi pykko,
When you close a running task, you shall see a message as shown in enclosed snap that it is going to run in background and how you can access it.

Please check “Tasks–>Advanced Tasks–>Open Task Manager” section.


Hi ghostza,
We have not been able to produce it. There are some code refactoring changes we have likely to go in next hot-fix, we shall see if you still able to produce it.


Just tried it, all seems fine. Not only did it run CIS right after installing it (forgot to mention that 6606 couldn’t even open CIS nor gave a prompt to restart) asking me all the usuall questions, it loaded fine after restart.

Ok thanks, team will be in touch.

This started with the Beta and now goes on with the RC. After very startup I have a lot of items in the unrecognized files pending analysis . This happens over four different PC’s with the RC or Beta on it.

Oh, yes, this, completely forgot about it but exactly this happened on my PC with the 6580 beta. Random - obviously safe - files I have on my PC for years now kept getting listed as unrecognized and I had to select all manually and choose trusted but every day a random number of files got listed again and again.

Mine has been doing the same and this the latest stable version not the beta or this RC, odd to see it still happening, mine are Steam games and a 150 other files. Even when putting them as trusted they come back.

Yes a visual bug when applications go longer than a day since the last time they were executed will show them as unrecognized in the file list, but once you execute them again they will go back to being safe. But the widget counter will stay the same until you launch a new executable that is not already in the file list.