Comodo v3 leaves ports open?!

I recently installed v3 and I just did a Shields up port scan and the firewall failed miserably. Ports 0-63 were stealthed but ports 64-1055 were open! I am behind a router which passes the port scan without problem but when I DMZ the computer almost all the ports are open.

I reinstalled comodo but the problem persists even with the fresh install. My firewall level is set to train with safe mode and the only change I have made to the settings is to stealth all ports.

HELP!

I have the same problem. I allowed my VPN to have outbound priviledges, and I expected the VPN connection to fail because it listens on UDP ports and when blocked, shouldn’t have worked… yet the connection succeeds and the vpn was fully established. I guess you get what you paid for.

I’m not sure (I’ve never DMZ’ed anything) but if you leave ports open via DMZ , what else would you expect?

It works as claimed for almost all people whait are your network and application rules
what vpn are you using

On the shields up scan try connecting directly
you could be getting replys from your router

Here´s my results I am directly conected to the intenet via CM
GRC Port Authority Report created on UTC: 2007-12-12 at 03:27:41

Results from scan of ports: 0-1055

0 Ports Open
0 Ports Closed

1056 Ports Stealth

1056 Ports Tested

ALL PORTS tested were found to be: STEALTH.

TruStealth: PASSED - ALL tested ports were STEALTH,
- NO unsolicited packets were received,
- NO Ping reply (ICMP Echo) was received.

OD