Hey,
I have installed Comodo Firewall on my pc… No problems there… But when i want to brows the other PCs on the network, they dont show up under workgroup… I only the the PC where Comodo is installed…
The other PCs cant even se them self under Workgroup, only the PC where Comodo is installed.
Does anyone have any idea, to what the problem might be…
The network worked fine, when they all was using ZoneAlarm…
Thanks for any help
To see your LAN, there are two things you need to do, both of which are under SECURITY - TASKS.
Select “Add/Remove/Modifya Zone” and add a zone that covers the IP addresses of the PCs and routers on your LAN.
Select “Define a new trusted network” and select the zone defined in step 1.
you should now be able to see your LAN and it will have also created the default network monitor rules to allow unencumbered LAN traffic and secured internet access from the PC running CPF.
Hope this helps,
Ewen 
Thanks, but it still dont work. And btw the rule was already in the Trusted Zone…
I still only se my own PC… the one with Comodo installed
I have added a rule…
EDIT: Works now… But i dont understand, why make that rule should help… It was there already… Defined as a trusted 192.168.0.0 to 192.168.0.255.
EDIT: Cant get it to work with my wireless notebook… Any idea…
Hmm. No i have installed Comodo on my Notebook, with the same trusted as the above…
Now i cant se my own computer…?? But when i shut down the notebook, i can se my own pc again…?
This is really strange…