I have searched and read post for a hour now, and I am getting frustrated. I am looking for a screenshot that show what the default Global rules should look like. There are a lot of very good explanations in the forum for writing rules, how they interact, etc. However, I suffer from long term loss of short term memory. So by the time I read a post on how to write the Global rules, and what order they go in, etc., I have forgotten everything. A picture IS truly worth 1000 words. Please, can someone post a screenshot of what the Global rules should look like? Thanks, and have a great day!
[nobbc]Global Rules
INFORMATION: There are 14 Global Rules reported In CFP Configuration Tree
[0] Allow IP Out From IP Any To Zone [Local Area Network] Where Protocol Is Any
[1] Allow IP In From Zone [Local Area Network] To IP Any Where Protocol Is Any
[2] Block & Log TCP Or UDP Out From IP Any To IP Any Where Source Port Is Any And Destination Port Is In [Netbios and DCOM]
[3] Allow & Log TCP Or UDP Out From IP Any To IP Any Where Source Port Is In [Privileged Ports] And Destination Port Is Any
[4] Allow TCP Or UDP Out From IP Any To IP Any Where Source Port Is Not In [Privileged Ports] And Destination Port Is Any
[5] Allow UDP In From IP Any To IP Any Where Source Port Is Any And Destination Port Is In [Incoming UDP Ports]
[6] Allow TCP In From IP Any To IP Any Where Source Port Is Any And Destination Port Is In [Incoming TCP Ports]
[7] Allow ICMP Out From IP Any To IP Any Where ICMP Message Is ECHO REQUEST {8.0}
[8] Allow ICMP In From IP Any To IP Any Where ICMP Message Is ECHO REPLY {0.0}
[9] Allow ICMP In From IP Any To IP Any Where ICMP Message Is TIME EXCEEDED {11.0}
[10] Allow ICMP In From IP Any To IP Any Where ICMP Message Is PORT UNREACHABLE {3.3}
[11] Allow ICMP In From IP Any To IP Any Where ICMP Message Is FRAGMENTATION NEEDED {3.4}
[12] Allow IP Out From IP Any To IP Any Where Protocol Is GRE
[13] Block & Log IP In/Out From IP Any To IP Any Where Protocol Is Any[/nobbc]
[attachment deleted by admin]
Wow, that was quick! Thank you so much! :■■■■
You’re welcome 
That’s my current config with upnp disabled
A prototype ruleset is explained there https://forums.comodo.com/help_for_v3/i_need_help_with_configuration_regarding_cfp_30_and_my_router-t24975.0.html;msg178996#msg178996