I am trying to find my NAS on my computer that have installed comodo firewall. But this NAS couldn’t b found as firewall blocked it. When disabling the firewall this NAS is found without any problems. But as soon I enable FW this NAS is disconnected.
My questions is where do I make this connection as trusted?
Is are there any support here?
a quick dirty way would be to turn the nas off. Enable the firewall and turn it to training mode. Then turn on the nas and find it. Once done, turn the firewall back to safe mode. That should do it.
You need to make your local network or your NAS IP address a trusted zone.
How to make your local network a trusted zone.?
First look up your IP address and subnet mask. In Windows go to Start → Run → cmd → enter → ipconfig → enter → now lookup your IP address and subnet mask.
Second create a zone in My Network Zones (Firewall → Network Security policy). Choose Add → A New Network Zone → fill in a name like My local network → Apply. Now select My Local Network Zone → Add → A new address → choose An IP Address Mask → fill in your local IP something like 192.168.1.x usually and your subnet mask; usually 255.255.255.0 → Apply. Now check and see the new network defined. Exit using Apply.
Now we are going to use the Stealth Ports Wizard to make your local network a trusted network:
Choose “Define a new trusted network and stealth my ports to EVERYONE else” → Next → choose “I would like to trust an existing My Network Zone” → choose your local network zone from the drop down box at the bottom → Finish.
Now check your Global Rules and see your network added.