Installation Error - disk's total sector is not consistent


I’m trying to install CTM to my Win XP SP3 32-bit.

I have two HDDs. 2x 250 GB. 1 HDD slitted to C:, D: & E: and the other to F: & G:

I tried to install CTM to C: ~40GB free space.

Installation went through until the point I had to restart the PC.
During booting I got the following error message:

“The disk’s total sectors is not consistent with the disk size. Setup cannot continue.”

Any help ???
Thanks in advance .

I also got this, but I am on Win 7 64 bit, then after I loaded into the OS, CTM was not installed anymore, and since then, any reinstall, upon reboot it’s no longer installed.

Windows 7 Business (x64) (build 7600)
Install Language: English (United States)
System Locale: English (United States) No details available
Processor a Main Circuit Board b
2.87 gigahertz AMD Athlon II X4 620
512 kilobyte primary memory cache
2048 kilobyte secondary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded Board: ASUSTeK Computer INC. M3A78-CM Rev X.0x
Serial Number: MF708CG02200025
Bus Clock: 220 megahertz
BIOS: American Megatrends Inc. 2101 09/21/2009

1789.02 Gigabytes Usable Hard Drive Capacity
1356.67 Gigabytes Hard Drive Free Space

HL-DT-ST DVDRAM GH20NS15 ATA Device [CD-ROM drive]
HL-DT-ST DVDRAM GH20NS15 ATA Device [CD-ROM drive]
3.5" format removeable media [Floppy drive]

Android UMS Composite USB Device [Hard drive] – drive 5
Generic External USB Device [Hard drive] (640.13 GB) – drive 4, s/n WD-WCAUF2524154
ST3500641AS ATA Device [Hard drive] (500.11 GB) – drive 1, s/n 3PM168JK, SMART Status: Healthy
ST3500641AS ATA Device [Hard drive] (500.11 GB) – drive 0, s/n 3PM13J6V, SMART Status: Healthy
WDC WD740GD-00FLA0 [Hard drive] (74.36 GB) – drive 3, s/n WD-WMAKE1058872, rev 21.08U21, SMART Status: Healthy
WDC WD740GD-00FLC0 [Hard drive] (74.36 GB) – drive 2, s/n WD-WMAKE2488367, rev 33.08F33, SMART Status: Healthy 8192 Megabytes Usable Installed Memory

Slot ‘DIMM0’ has 2048 MB
Slot ‘DIMM1’ has 2048 MB
Slot ‘DIMM2’ has 2048 MB
Slot ‘DIMM3’ has 2048 MB
Local Drive Volumes

c: (NTFS on drive 2) 37.17 GB 8.34 GB free
d: (NTFS on drive 3) 74.34 GB 1.04 GB free
e: (NTFS on drive 2) 37.17 GB 28.46 GB free
h: (NTFS on drive 4) 131.07 GB 50.17 GB free
i: (NTFS on drive 4) 509.06 GB 376.82 GB free
j: (NTFS on drive 0) 500.11 GB 500.00 GB free
k: (NTFS on drive 1) 500.11 GB 391.85 GB free

Controllers Display
Standard floppy disk controller
ATA Channel 0 [Controller] (2x)
ATA Channel 1 [Controller] (2x)
Standard Dual Channel PCI IDE Controller (2x) NVIDIA GeForce GTX 260 [Display adapter]
Generic Non-PnP Monitor
Bus Adapters Multimedia
AVNHNA0J IDE Controller
Standard Enhanced PCI to USB Host Controller (2x)
Standard OpenHCD USB Host Controller (5x) Creative SB X-Fi
Virus Protection [Back to Top] new Group Policies
No details available None discovered
Communications Other Devices

  	HID-compliant consumer control device

HID-compliant device (2x)
USB Input Device (4x)
Photosmart C4380 series
HID Keyboard Device (3x)
HID-compliant mouse
Photosmart C4380 series
Generic USB Hub (3x)
USB Composite Device (2x)
USB Mass Storage Device (2x)
USB Root Hub (7x)
USB Virtualization Connector Driver
Generic volume shadow copy


Really? No response from Comodo? I guess I will be trashing the install on my notebook, which works, due to no response and will not be worrying about this at all on my home machine which is where the problem is.

Thanks for nothing!

Just because they don’t respond doesn’t mean they did not look at it.

There is a good chance that they cant fix it with this version, so you will have to wait for the next version to install it.

That doesn’t mean they see it either. Just look at my error reports all the same for 2 beta and a final release of CTM. None is done. ;D

PM Doskey with links to your posts, and ask if he can help.

Nah, thanks. I’m able to install it unplugging the second HDD and it works. There r some other errors - I just don’t want to shout into the empty space - it’s a bit tiresome. We don’t speak about my headache too. Sorry. Sorry I can’t help a man.

This IS the HELP forums for their company and product, I would expect them to acknowledge the issues with their product. If they know about it, just say SO. If they don’t, SAY SO.

The forums are run by us mod’s we are volunteers, all the forum fee’s are payed by Comodo. So dont always expect a reply… you can bump your post if 24+ hours have gone by, without any reply.

You can do the same I told Apach, PM Doskey, his the Team Leader for CTM.

I posted on the 9th, it’s now the 13th…

Hi, sorry for replying late, we are investigating this error.

Best Regards

Has been fixed in 157 release.