Firewall Error

Under CIS firewall a driver firewall error appear in Windows 10 HOME with following error reported and collected from windows minidump with whocrash:

Crash dump directory: C:\WINDOWS\Minidump

Crash dumps are enabled on your computer.

On Sat 1/21/2017 12:42:15 PM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\012117-111796-01.dmp
This was probably caused by the following module: inspect.sys (0xFFFFF80851C61251)
Bugcheck code: 0xD1 (0xB4, 0x2, 0x0, 0xFFFFF80851C61251)
file path: C:\WINDOWS\system32\drivers\inspect.sys
product: COMODO Internet Security Firewall Driver
company: COMODO
description: COMODO Internet Security Firewall Driver
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: inspect.sys (COMODO Internet Security Firewall Driver, COMODO).

What were you doing when the blue screen happened? Also attach the dump file here. What version of Windows are you running and what version of CIS did this occur on?

Step by step this time because I was in a hurry.
I have a laptop with the following configuration:
1. Windows 10 Home 64-bit (version 1607; OS Build 1493.693 ) for operating sistem
2. CPU
Intel Core i7 4510U
Cores 2
Threads 4
Name Intel Core i7 4510U
Code Name Haswell ULT
Package Socket 1168 BGA
Technology 22nm
Specification Intel Core i7-4510U CPU @ 2.00GHz
Family 6
Extended Family 6
Model 5
Extended Model 45
Stepping 1
Revision C0
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX, AES, AVX, AVX2, FMA3
Virtualization Supported, Enabled
Hyperthreading Supported, Enabled
Fan Speed 2700 RPM
Stock Core Speed 2000 MHz
Stock Bus Speed 100 MHz
Average Temperature 56 °C
L1 Data Cache Size 2 x 32 KBytes
L1 Instructions Cache Size 2 x 32 KBytes
L2 Unified Cache Size 2 x 256 KBytes
L3 Unified Cache Size 4096 KBytes
Core Speed Multiplier Bus Speed Temperature Threads
Core 0 2593.8 MHz x 26.0 99.8 MHz 53 °C APIC ID: 0, 1
Core 1 2593.8 MHz x 26.0 99.8 MHz 58 °C APIC ID: 2, 3

Type DDR3
Size 3980 MBytes
Channels # Single
DRAM Frequency 798.1 MHz
CAS# Latency (CL) 11 clocks
RAS# to CAS# Delay (tRCD) 11 clocks
RAS# Precharge (tRP) 11 clocks
Cycle Time (tRAS) 28 clocks
Command Rate (CR) 1T
Physical Memory
Memory Usage 80 %
Total Physical 3.89 GB
Available Physical 771 MB
Total Virtual 5.32 GB
Available Virtual 1.11 GB
Number Of SPD Modules 0

Name Generic PnP Monitor on Intel HD Graphics Family
Current Resolution 1366x768 pixels
Work Resolution 1366x728 pixels
State Enabled, Primary
Monitor Width 1366
Monitor Height 768
Monitor BPP 32 bits per pixel
Monitor Frequency 60 Hz
Device \.\DISPLAY1\Monitor0
Intel HD Graphics Family
Manufacturer Intel
Model HD Graphics Family
Device ID 8086-0A16
Revision C
Subvendor ASUStek Computer Inc (1043)
Current Performance Level Level 0
Current GPU Clock 1097 MHz
Voltage 0.900 V
Driver version
Count of performance levels : 1
Level 1 - “Perf Level 0”
GPU Clock 1097 MHz
NVIDIA GeForce 820M
Manufacturer NVIDIA
Model GeForce 820M
Device ID 10DE-1140
Revision A2
Subvendor ASUStek Computer Inc (1043)
Current Performance Level Level 0
Current GPU Clock 162 MHz
Current Memory Clock 405 MHz
Current Shader Clock 405 MHz
Voltage 0.900 V
Bus Interface PCI Express x4
Temperature 50 °C
Driver version
BIOS Version 75.17.7c.00.0e
Physical Memory 1023 MB
Virtual Memory 1024 MB
Count of performance levels : 2
Level 1 - “2D Desktop”
GPU Clock 162 MHz
Memory Clock 324 MHz
Shader Clock 405 MHz
Level 2 - “3D Applications”
GPU Clock 625 MHz
Memory Clock 1250 MHz
Shader Clock 900 MHz

Hard drives
Manufacturer Seagate
Heads 16
Cylinders 60,801
Tracks 15,504,255
Sectors 976,768,065
SATA type SATA-III 6.0Gb/s
Device type Fixed
ATA Standard ATA8-ACS
Firmware Version Number 0003SDM1
LBA Size 48-bit LBA
Power On Count 2444 times
Power On Time 263.8 days
Speed 5400 RPM
Features S.M.A.R.T., APM, NCQ
Max. Transfer Mode SATA III 6.0Gb/s
Used Transfer Mode SATA III 6.0Gb/s
Interface SATA
Capacity 465 GB
Real size 500,107,862,016 bytes
RAID Type None
Status Good
Temperature 31 °C
Temperature Range OK (less than 50 °C)
S.M.A.R.T attributes
Attribute name Real value Current Worst Threshold Raw Value Status
01 Read Error Rate 0 106 99 6 0000A709F8 Good
03 Spin-Up Time 0 ms 99 99 0 0000000000 Good
04 Start/Stop Count 4,366 96 96 20 000000110E Good
05 Reallocated Sectors Count 0 100 100 36 0000000000 Good
07 Seek Error Rate 0 85 60 30 002848B64D Good
09 Power-On Hours (POH) 263d 18h 93 93 0 00000018BA Good
0A Spin Retry Count 0 100 100 97 0000000000 Good
0C Device Power Cycle Count 2,444 98 98 20 000000098C Good
B8 End-to-End error / IOEDC 0 100 100 99 0000000000 Good
BB Reported Uncorrectable Errors 0 100 100 0 0000000000 Good
BC Command Timeout 30,065,229,831 100 99 0 0000070007 Good
BD High Fly Writes (WDC) 0 100 100 0 0000000000 Good
BE Airflow Temperature 29 °C 71 49 45 002210001D Good
BF G-sense error rate 251 100 100 0 00000000FB Good
C0 Power-off Retract Count 38 100 100 0 0000000026 Good
C1 Load/Unload Cycle Count 36,748 82 82 0 0000008F8C Good
C2 Temperature 29 °C 29 51 0 000000001D Good
C5 Current Pending Sector Count 0 100 100 0 0000000000 Good
C6 Uncorrectable Sector Count 0 100 100 0 0000000000 Good
C7 UltraDMA CRC Error Count 0 200 200 0 0000000000 Good
F0 Head Flying Hours 257d 12h 93 93 0 0000001824 Good
F1 Total LBAs Written 73,923,707,249 100 253 0 0036324171 Good
F2 Total LBAs Read 134,811,245,084 100 253 0 0063605A1C Good
FE Free Fall Protection 0 100 100 0 0000000000 Good


  2. Blue screen apear when i was on facebook from Microsoft Edge.
    But i analized my own behavior and notice the blue screen appeared after i enabled hips and not only that i enabled heuristic scan with low priority probable heuristic scan was because something is eating resources. For example for a long time my windows version was working fine with Windows Defender Antivirus and windows firewall. After half a year i was able to install your security suite because earlier version was crashing all the time. Windows Defender is off by tweaks because on my laptop will not turn off on other security suite install.

  3. I will attach the dump file

5.P.S. I am sorry for my english mistakes if any.


P.S. My laptop works fine only with Windows Defender and with windows firewall/
Help me and I will not remove your CIS and I will install on every pc I will have (Make something or get me one hope to work fine with your security suite.)

Please check again with Comodo Internet Security v10.0.1.6209 thanks. If you still experience the issue then edit your post to be in the required bug reporting format thanks.