Can't use wireless printer on my network

Hello

I am having some trouble trying to print with my wireless printer, My CIS config is set to "Proactive Security.

Here are my CIS logs:

192.168.1.5 is my network so why is it blocked?

Here are my rules and settings:

Global rules:

Here is my network zone:

Should I add to that? Do i need to add 192.168.1.5 to it?

Any help would be very much appreciated! :slight_smile:

The network range 192.168.1.3/255.255.255.0 includes all from .3 to .255

Windows Updater and Windows System are the wrong rules for this. You’ll need to make your actual System Rule make sure of your network zone.

1st Rule:
Action: Allow
Protocol: IP
Direction: Out
Destination: Set Type to Network zone
Set Zone to Home #1

2nd Rule:
Action: Allow
Protocol: IP
Direction: In
Destination: Set Type to Network zone
Set Zone to Home #1

These rules turn your network zone (Home #1) into a trusted network and allow full communication between connected devices on your LAN.

You may also have to unchecking ‘Block fragmented IP traffic’ as it can cause problems with some printers.

Thanks! It fixed my problem, although I don’t know why the system rule wasn’t there for me but it was on my windows xp machine? Maybe the Proactive security config changes it? Anyways thanks again for the help :slight_smile: