Author Topic: Xbox 360 Live tutorial  (Read 122384 times)

Offline TigerJon

  • Newbie
  • *
  • Posts: 19
Re: Xbox 360 Live tutorial
« Reply #45 on: April 13, 2008, 05:47:47 PM »
:-\

Hello All,

This is my first post here and I really am new to the Comodo firewill I have installed.  I am glad I found this forum as I know I'll have lots of questions.  I have a wireless router connected to my PC and my xbox 360 has a wireless connection.  Today I wanted to listen to some music thru my 360 and it would not connect to my PC  (in the past this process worked fine with Norton).  I got an error message from the 360 saying that my firewall may be blocking it.  So, I clicked the DEFENSE tab, DEFENSE+SETTINGS, and DISABLED the SECURITY LEVEL to see if things would work, which they did. 

This thread looked like it would remedy my problem.  However, I can't even get started because I can't figure out how to define a trusted zone.  I tried to find another thread that would help me with this but I can't  Some help getting started would be greatly appreciated.  Thanks.

Jon
  BTW, my version is 3.0.18.309

Josh123

  • Guest
Re: Xbox 360 Live tutorial
« Reply #46 on: April 17, 2008, 12:19:07 AM »
  BTW, my version is 3.0.18.309

Hi Tiger,

Please start a new thread in "Help for v3" in the CFP 3 board, To help us reply quicker.

Thanks

Josh

Offline denis6902

  • Newbie
  • *
  • Posts: 1
Re: Xbox 360 Live tutorial
« Reply #47 on: November 16, 2008, 11:59:25 PM »
I am pretty confused, i have tried many things, i even closed the comodo firewall and still cant get connected.

My xbox is connected to the back of the wireless router, all connection tests run fin on xbox, but i always get error when the windows media center is trying to configure the extender.

can someone help me please.

Using the newer version: 3.5

Offline Skiddywinks

  • Newbie
  • *
  • Posts: 2
Re: Xbox 360 Live tutorial
« Reply #48 on: November 21, 2008, 09:16:52 AM »
Is there any way I can just tell Comodo to allow anything and everything through one of my ethernet ports? To get my Xbox to connect to the internet it needs to be assigned an IP address by the University system, and running it with a static one does not work. Therefore every time I set up Comodo to allow it, it only works until the next time I power cycle the Xbox.

Being able to simply tell it to allow anything and everything from and to my ethernet port would just be much easier. Is this possible?

Offline Skiddywinks

  • Newbie
  • *
  • Posts: 2
Re: Xbox 360 Live tutorial
« Reply #49 on: November 27, 2008, 10:41:15 AM »
No answer from anyone? Come on!

I have also now tried allowing "TCP or UDP" "In/Out" from and to my Xbox 360's MAC address, as well as allowing IP any direction, and still nothing.

What the heck?! It works perfectly with Comodo disabled, but I would rather not have to do that!

Offline Little Mac

  • Forum Volunteer
  • Global Moderator
  • Comodo's Hero
  • *****
  • Posts: 6303
  • The Colonel told me to.
Re: Xbox 360 Live tutorial
« Reply #50 on: December 18, 2008, 12:09:53 PM »
Skiddywinks,

Sorry no one's responded to your question; it appears to have slipped past review. 

What version of Comodo firewall are you using?  This will help us to help you set up your rules.

LM
These forums are focused on providing help and improvement for Comodo products.  Please treat other users with respect and make a positive contribution.  Thanks.
Forum Policy

 

Free Endpoint Protection
Seo4Smf 2.0 © SmfMod.Com Smf Destek