Author Topic: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)  (Read 54294 times)

Offline Dinoraptor101

  • Newbie
  • *
  • Posts: 1
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #45 on: May 31, 2017, 11:59:55 AM »
I use kubuntu and the format is .deb...  So I don't know what wrong with your compilation.  My kernel version of 64-bit Kubuntu is 4.8.0-37-generic #39-Ubuntu SMP; it still works fine for me.

I can confirm that KINTA-JAPAN  Driver.tar approach does not work on 4.8.xxx and later.
I have tested this on my machine Debian x64 Kernel 4.9.0  and received the same result as the quote above.

With the above error, scanning feature is still possible without real-time protection.

Offline charlie_xstar

  • Newbie
  • *
  • Posts: 6
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #46 on: May 31, 2017, 12:27:57 PM »
Read Reply#43...   Download the attachment driver.zip and try...
« Last Edit: May 31, 2017, 12:30:45 PM by charlie_xstar »

Offline lc-system76

  • Newbie
  • *
  • Posts: 2
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #47 on: June 26, 2017, 05:15:50 PM »
Update: Kinta's driver.tar and fix_rebuild_driver.sh are working perfectly on Debian8, kernel 3.16.0.  Thank you very much, Kinta.

Dear Kinta & Charlie:

Thank you very much for your hard work, but my system was hang after successfully installed kernel redirfs module.  First, I used Charlie's driver.tar with Ubuntu 16.04.2.  I installed successfully with post_setup.sh script, but my system was hang.  Later, I used Kinta's driver.tar and fix_rebuild_driver.sh with Ubuntu 14.04.2 (linux kernel 3.13.0-121).  I was success in installing kernel redirfs module with fix_rebuild_driver.sh, although it failed at first with post_setup.sh script.  My system was also hang after that.  I did not see any reports regarding to system hang in this forum, so I am assuming only myself was an unlucky one.

Best regards,
« Last Edit: July 18, 2017, 06:59:32 PM by lc-system76 »

Offline military

  • Comodo's Hero
  • *****
  • Posts: 753
    • comss.ru
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #48 on: September 09, 2017, 09:30:31 PM »
Hello!
Erorrs with dependency libssl0.9.8 . I have the version installed libssl 1.0.0 ,  in the repository is no version libssl0.9.8 .
Мужество, спокойствие и доверие.

Offline lc-system76

  • Newbie
  • *
  • Posts: 2
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #49 on: September 09, 2017, 10:28:27 PM »
Hello!
Erorrs with dependency libssl0.9.8 . I have the version installed libssl 1.0.0 ,  in the repository is no version libssl0.9.8 .
Hello,
It can be found in Ubuntu 14.04, code name: Trusty Tahr.  Good luck !!!

Offline Raymond E. Rogers

  • Newbie
  • *
  • Posts: 3
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #50 on: October 09, 2017, 08:39:16 AM »
Reply #34 works on:
Ubuntu
Release 16.04.3 LTS (Xenial Xerus) 64-bit
Kernel Linux 4.4.0-96-generic x86_64
MATE 1.12.1


Offline Emre Kağan

  • Comodo Family Member
  • ***
  • Posts: 56
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #51 on: October 09, 2017, 08:51:56 AM »
Changes have been made in Kernel 4.9 and after...

Tested on Kubuntu 17.04 (64-bit) with kernel 4.10...  hopefully it should also work on previous versions as well.

Updated version of driver.tar is attached here...

1) unzip driver.zip.
2) put driver.tar in /opt/COMODO
3) run post_setup.sh as root.

Charlie

Thanks. Ubuntu also works well. However, Pardus (Debian) also has kernel errors.
« Last Edit: October 09, 2017, 08:54:49 AM by Emre Kağan »

Offline tioguda

  • Newbie
  • *
  • Posts: 1
Re: Filesystem Filter Driver for kernel 3.5-3.18(redirfs and avflt)
« Reply #52 on: November 07, 2018, 12:35:51 PM »
Hello, I'm stuck in this error already has a time and I can not solve.
can anybody help me?

/tmp/makepkg/comodo-modules-419/src/driver/avflt/avflt_check.c: In function 'avflt_get_file':
/tmp/makepkg/comodo-modules-419/src/driver/avflt/avflt_check.c:305:35: error: implicit declaration of function 'current_cred'; did you mean 'current_time'? [-Werror=implicit-function-declaration]
  file = dentry_open(&path, flags, current_cred());
                                   ^~~~~~~~~~~~
                                   current_time
/tmp/makepkg/comodo-modules-419/src/driver/avflt/avflt_check.c:305:35: warning: passing argument 3 of 'dentry_open' makes pointer from integer without a cast [-Wint-conversion]
  file = dentry_open(&path, flags, current_cred());
                                   ^~~~~~~~~~~~~~
In file included from ./include/linux/poll.h:10,
                 from /tmp/makepkg/comodo-modules-419/src/driver/avflt/avflt.h:31,
                 from /tmp/makepkg/comodo-modules-419/src/driver/avflt/avflt_check.c:26:
./include/linux/fs.h:2460:22: note: expected 'const struct cred *' but argument is of type 'int'
 extern struct file * dentry_open(const struct path *, int, const struct cred *);
                      ^~~~~~~~~~~
cc1: some warnings being treated as errors

I use Manjaro Linux.
Thanks in advance.

 

Free Endpoint Protection
Seo4Smf 2.0 © SmfMod.Com Smf Destek