Author Topic: CFP 3.0.8.214 Beta Workarounds [Closed]  (Read 6435 times)

Offline gibran

  • Average User
  • Comodo's Hero
  • *****
  • Posts: 5056
  • A bad workman always blames his tools
CFP 3.0.8.214 Beta Workarounds [Closed]
« on: August 27, 2007, 08:20:12 PM »
If you have an application that was causing or having conflicts with CFPv3, and have figured out a method to avoid those conflicts by changes to Firewall or Defense + rules or settings, please post those specific details here for the benefit of other users.

  • Avast web shield - Cannot load Webpages
    This AV is almost compatible with V3. Set HTTP Proxy to 127.0.0.1:12080 In your Web browser.

  • Useful Firewall rules and policies.
    Firewall\Common Tasks\My Network Zones
    • Local Area Network
          IP in [your network IP Mask (eg 10.0.0.0/255.0.0.0)]
          IP 0.0.0.0
          IP 255.255.255.255
    • Internet-wide Multicast
          IP in 224.0.1.0-238.255.255.255
    • Special & Local Multicast
          IP in 224.0.0.0-224.0.0.255
          IP in 239.0.0.0-239.255.255.255

    Firewall\Advanced\Predefined Firewall Policies
    • LAN
          Allow IP In From In [Local Area Network] To IP Any Where Protocol Is Any
          Allow IP Out From IP Any To In [Local Area Network] Where Protocol Is Any
          Allow IP In From In [Special & Local Multicast] To IP Any Where Protocol Is Any
          Allow IP Out From IP Any To In [Special & Local Multicast] Where Protocol Is Any
          Block and Log All Unmatching Requests
    • LAN & Outgoing
          Allow IP In From In [Local Area Network] To IP Any Where Protocol Is Any
          Allow IP Out From IP Any To In [Local Area Network] Where Protocol Is Any
          Allow IP In From In [Special & Local Multicast] To IP Any Where Protocol Is Any
          Allow IP Out From IP Any To In [Special & Local Multicast] Where Protocol Is Any
          Allow TCP or UDP Outgoing Requests
          Block and Log All Unmatching Requests
    • Web Browsers with FTP capabilities by georgeB
          Allow Outgoing TCP Requests
          Allow Outgoing DNS Requests
          Allow Incoming FTP-DATA Requests
          Block and Log All Unmatching Requests 
    • Ftp Clients by georgeB
          Allow Outgoing TCP Requests
          Allow Outgoing DNS Requests
          Allow Incoming FTP-DATA Requests
          Block and Log All Unmatching Requests 
    Firewall\Advanced\Network Security Policies\Application Rules
    • Svchost - LAN & Outgoing
    • System - LAN & Outgoing
    • Explorer - LAN
    Firewall\Advanced\Network Security Policies\Global Rules
    • Allow and Log TCP or UDP Out From IP Any to IP Any Where Source Port Is In [Privileged Ports] And Destination Port Is Any
    • Allow TCP or UDP Out From IP Any to IP Any Where Source Port Is Not In [Privileged Ports] And Destination Port Is Any
    • Allow IP out from Any IP to Any IP where the protocol is GRE
    • Allow ICMP Out From From IP Any to IP Any Where ICMP Message Is ECHO REQUEST
    • Allow ICMP In From From IP Any to IP Any Where ICMP Message Is ECHO REPLY
    • Allow ICMP In From From IP Any to IP Any Where ICMP Message Is TIME EXCEEDED
    • Allow ICMP In From From IP Any to IP Any Where ICMP Message Is FRAGMENTATION NEEDED

    Last Step Should be to use Firewall\Common Tasks\Firewall Stealth Configuration and Choose "I would like to be completely visible from whitin a trusted network" and allow [Local Area Network] and [Special & Local Multicast]

    NOTE: When you add your private IP range to yout [Local Area Network] Zone don't forget to add Your Network Address (usually ending with .0) and Brodcast Address (usually ending with .255) Using IP Masks or IP Ranges

    eg: Network Address: 10.0.0.0, Brodcast Address: 10.255.255.255
    IP Mask 10.0.0.0/255.0.0.0
    IP Range 10.0.0.0-10.255.255.255
    PS: ICMP In From From IP Any to IP Any Where ICMP Message Is FRAGMENTATION NEEDED is currently blocked by V3 and  it is not possible to allow it .

  • CFP Password Crash CFP
    Use CFP Fix to reset the password
    CPF fix need Windows Script 5.6

  • Cannot disable CFP Image Execution Control
    Use CFP Fix to disable CFP Image Execution Control
    CPF fix need Windows Script 5.6







[attachment deleted by admin]
« Last Edit: October 01, 2007, 06:09:35 PM by Soya Lv. 5 »
"In the beginning the Universe was created. This has made a lot of people very angry and has been widely regarded as a bad move."- Douglas Adams

 

Free Endpoint Protection
Seo4Smf 2.0 © SmfMod.Com Smf Destek