Author Topic: Network Control Rule cannot only change the description (3.0.25.378 X32)  (Read 14004 times)

Offline BBeat

  • Comodo Loves me
  • ****
  • Posts: 119
Network Control Rule cannot only change the description
click Apply button, the description message NOT changed.

Change the description must change other any setting together.

Sorry for my bad english.

[attachment deleted by admin]
« Last Edit: June 13, 2008, 08:35:37 AM by Natori »
Win10x64, CFW 10.0.1.6294
        ~BFE Bug never fix :D~
CIS have firewall allow/block mixing rule bug started in CIS 5.12, new connection maybe identified as aother app initiate, trust me ;)

Offline kail

  • Randomly Appearing
  • Global Moderator
  • Comodo's Hero
  • *****
  • Posts: 11361
  • The future is much like the present, only longer.
    • COMODO's free software!
I confirm this (Network Security Policy - Application & Global Rule Description). Clicking on a tab will force CFP into realising the description has been changed.
My System Details: W10Px64 with CIS 10 Beta, Firefox & Becky!
Forum Policy.
____
The problem is not the problems, the problem is people's attitude towards those problems.

Offline kail

  • Randomly Appearing
  • Global Moderator
  • Comodo's Hero
  • *****
  • Posts: 11361
  • The future is much like the present, only longer.
    • COMODO's free software!
*UPDATE* XRef Topic

The above work-around method only works once. Any subsequent changes using that method do not work. So far, I can only get it to work by ticking or un-ticking the Log field to force the Description change on Apply. Not very satisfactory, since you need to re-edit the rule to put the Log field back to what is was in the first place just to change the Description of a rule.

My System Details: W10Px64 with CIS 10 Beta, Firefox & Becky!
Forum Policy.
____
The problem is not the problems, the problem is people's attitude towards those problems.

Offline Touche

  • Comodo Member
  • **
  • Posts: 34
WinXP SP2
Comodo v3.0.25.378 x32

Same problem. Workaround works, but it really should be fixed. Seems there are a lot of bugs regarding Application rules.

Offline fOrTy_7

  • Comodo's Hero
  • *****
  • Posts: 588
Network Control Rule cannot only change the description
click Apply button, the description message NOT changed.

Change the description must change other any setting together.

Sorry for my bad english.

This bug is more serious. It affect not only the description field, but also the destination port field. I didn't check other fields, but more might be affected.
« Last Edit: September 20, 2008, 04:08:06 PM by fOrTy_7 »

Offline fOrTy_7

  • Comodo's Hero
  • *****
  • Posts: 588
Network Control Rule cannot only change the description [FIXED]
« Reply #5 on: October 04, 2008, 04:29:39 AM »
This bug has been fixed in CIS beta3.

 

Free Endpoint Protection
Seo4Smf 2.0 © SmfMod.Com Smf Destek