Author Topic: Network security policy issue (3.0.8.214)  (Read 2658 times)

Offline dark_ixion

  • Newbie
  • *
  • Posts: 1
Network security policy issue (3.0.8.214)
« on: September 21, 2007, 07:39:45 PM »
Hi,

I've noticed that if I set up a Global Rule in my Network Security Policy, the "All" option doesn't work.  This section is found in the Firewall GUI through Firewall>Advanced>Network Security Policy>Global Rules

For example:

Action: Allow
Protocol: TCP or UDP
Direction: In/Out
Source Address: Any
Destination Address: 192.168.123.17
Source Port: Any
Destination Address: Port 80

This does not allow another PC on my network to access 192.168.123.17

But the following does:

Action: Allow
Protocol: TCP or UDP
Direction: In/Out
Source Address: IP Range - Start IP: 192.168.123.0, End IP: 192.168.123.255
Destination Address: 192.168.123.17
Source Port: Any
Destination Address: Port 80

The Source Address option of "Any" seems to black all source addresses.  No "Exlude" options were used in any part of the setup of this rule.

The Global Rules list appear in the following order in both working and non-working cases:
1) Allow All Outgoing Requests
2) Block All Incoming Requests
3) Incoming Web (this is for the setup described above)

Software: COMODO Firewall BETA version 3.0.8.214
Operating System: Windows XP Professional x64 Service Pack 2
Anti-virus: AVG Free Edition
« Last Edit: September 21, 2007, 07:46:40 PM by dark_ixion »

 

Free Endpoint Protection
Seo4Smf 2.0 © SmfMod.Com Smf Destek