Comprehensive Instructions for Completely Removing Comodo Firewall Pro 3 [INFO]

[Guest]

[Dennis2]

I know...I did that the first time, and there were no entries (I use Windows XP Pro).

It's a moot point, though, as Yuriy points out above that these entries likely appear only in Vista's Device Manager.

Oops sorry 
That will teach me to look properly just WAN miniports in XP none for comodo.
Dennis

[dragonpup]

Thanks to all so far in this thread!

I installed v.3 yesterday from v.2.4 without incident on XP Pro SP2. Then today I changed Defense settings to Paranoid and ran a full backup. Now I can't even run Firefox or even shutdown as I am now getting  You don't have access to shutdown and You dont have access run program type of messages. I can shutdown from Task Manager,  but re-boot won't complete...have tried 3 times.

I am using other partition on same notebook PC. Is there a way I can edit the registry on C: (where CP3 is) from THIS partition (E:)?

All I want is to go back to 2.4 which was fine.

Thanks in advance!

[USSS]

Can you boot into Safe Mode? 

If so, you may be able to open CFP and revert back to your original settings that worked (before you changed to Paranoid mode).  You can also remove CFP in Safe Mode, if you want to downgrade to v2.4.

As for your question about editing the registry, I don't know.  I would leave the registry alone for now, until you perform additional troubleshooting.

[Searinox]

Does nobody know anything about how to rid myself of the phantom CFP miniport from device manager PLEASE? With each install/uninstall I accumulate a new one.

[manxman]

Thanks to all so far in this thread!

I installed v.3 yesterday from v.2.4 without incident on XP Pro SP2. Then today I changed Defense settings to Paranoid and ran a full backup. Now I can't even run Firefox or even shutdown as I am now getting  You don't have access to shutdown and You dont have access run program type of messages. I can shutdown from Task Manager,  but re-boot won't complete...have tried 3 times.

I am using other partition on same notebook PC. Is there a way I can edit the registry on C: (where CP3 is) from THIS partition (E:)?

All I want is to go back to 2.4 which was fine.

Thanks in advance!

ooops  ..

go  back  to  pages  4  or  5  onwards  and  read  my  probs  getting  back  into  my  comp...

had  to  caddie  the  drive and  slave  to  a  new  machine  to   get  back  in  ..  you  have  to  change  ownweship  of  the  harddrive...


unlucky  m8  ..  looks  like  your  SAM  files  have  been  corrupted  or  worse  non  existant  anymore  ..

crazy  all  for  a  free  firewal;  i  didnt  even  need  ..  im  behind  a  router  firewall  so  windows  firewall was  more  than  enough...

beware  free  gifts  ..  how  the  idiots  didnt   include  an  adequate  unynstaller  is  beyond  me....


ussss  and  ragwing  will  help  you  as  best  they  can  and  a big  thumbs  up  to  both..

just  a  pity  they  have  to  help  clean  up  such  a  mess  made  by  the  idiots  that  released  a  patently  flawed  product...

[Searinox]

I would like to repeat myself... I CANNOT UNINSTALL CFP MINIPORT. This time I would like some help with instructions.

[Yuriy]

how to rid myself of the phantom CFP miniport from device manager?

Did you try to remove it from safe mode?

[Searinox]

Yes. All it does is refresh the device manager and NOTHING. they are still there.

[USSS]

Maybe the more-important question is this:

Are the CFP Miniports causing problems on your system?

Yes, I heartily agree that you should be able to remove them without difficulty.  However, I think this will eventually require editing of another part of the registry, and we simply don't yet know the location of the relevant keys.

I believe there is still some remnant of CFP -- besides the miniports listed in Device Manager -- that is preventing their removal.  If you have not already done so, try performing a manual search of the registry for "CFP" + "miniport" and see if anything pops up.

[Dennis2]

Yes. All it does is refresh the device manager and NOTHING. they are still there.

Just a thought have you tried disabling it and rebooting before trying to remove it sorry if you already have tried this.
Dennis

[Searinox]

I have. And yes it DOES cause me A LOT of problems with its mere presence.

[USSS]

I have. And yes it DOES cause me A LOT of problems with its mere presence.

OK, can you be specific?  Are you getting BSODs, slow performance, Internet connectivity problems?  What errors are showing up in Event Viewer?  Are they directly attributable to CFP Miniports?

[Searinox]

--Windows Vista 32 bit--

With CFP installed, sometimes after startup:

-Windows Experience Index takes 5 minutes to show up in System Properties window
-Windows Live Messenger takes 5 minutes to start
-Network and Sharing Center takes 5 minutes to start
-disabling or enabling a network connection takes 5 minutes to accomplish, BUT ONLY ONCE PER SESSION
-drivers of any kind take 5 minutes to install
-IrfanView takes 10 seconds to start instead of 2

During all this time svchost.exe -k netsvcs hogs the processor, except MSN, where msnmsgr.exe is the CPU hogger. The only cure I've found is system restore or uninstalling CFP.

Upon a full CLEAN reinstall of CFP the "Comodo Firewall Miniport" is installed ONLY AFTER THE SYSTEM RESTART. At which point the network firewall reports not to be functioning properly. Install of the Comodo Firewall Miniport may or may not be successful.

If it succeeds:

-CFP Miniport will appear in the device manager under Network Adapters as a visible device, when normally it was hidden from view.
-Windows will freeze just seconds after startup, leaving only the mouse cursor running.

If it does not succeed:

-CFP Miniport will appear in device manager under Network Adapters with an exclamation mark.
-Windows will NOT freeze, and Defense+ alerts will still show up, but not firewall ones.

In BOTH cases of success and failiure CFP will, upon uninstall, leave a Comodo Firewall Miniport in Device Manager with an exclamation mark. The device cannot be removed even after performing a cleanup, neither in safe mode nor elsewhere.

I have run a search on google. There are several other cases exactly like mine which nobody has been able to solve, even after having followed the removal instructions and the batch file on your forums. I urge Comodo to take a look at these cases and acknowledge their existance.

http://ubuntuforums.org/showthread.php?p=4034660

http://www.techsupportforum.com/microsoft-support/windows-vista-support/206700-networking-screwed-after-uninstalling-comodo-firewall.html

http://forums.slickdeals.net/showthread.php?sduid=0&t=806460

All who've reported the issues were using Vista systems. I think the best thing you could do for me right now is provide me with a 32bit debug installer of CFP that'll log everything that goes right and wrong during install.

[Yuriy]

Thanks for your description of problem and for the links. Can you please confirm you experience issue with 3.0.22.349 version?

[Searinox]

Whoo yeah boy can I ever. It's the latest alright. Google it some more guys, there's a few others who whined about it too.

[Tags:]