Save settings, Rule mismatch, buttons, Protocol Driver failure

Well, been using now comodo on more than 10-20 machines like several months. (Little BSOD here there, but in 99% of time it's just fine unless either drivers crash or cmdagent.exe drop 100% load on user profile load-up. Specially user switching was fixed on past new releases which was nice.)

Common Windows Vista SP1-2 x86/x64 & Windows 7 x86/x64 list bugs:

Problem:
Bug on 'editing' existing Firewall Rule > new rule. = new rule doesn't apply, old rule does apply example:

Original rule Application 'X':
Allow TCP Out From IP 1.1.1.1 To IP Any Where Source Port Is Any Destination Port is 80
Edited Rule:
Allow TCP Out From IP Any To IP Any Where Source Port Is Any Destination Port is 80

When connection comes from 'Any' IP to application it will 'Ask' for action from firewall.

'Temp' Solution:
Only way past this is to make rule manually. This bug has been with Comodo so long I can't even remember when I catched this first time.

Windows 7 x64 specific issue:

Problem:
While installing v3.10.102363.531 installs just fine, but it hangs on reboot + it skips installing Network controller 'Protocol'-driver completely.

v3.12.111745.560 however doesn't install at all. It's totally bugged. As someone obviously just wants to compress the 'EXE' and so it moves the installing to Windows temp = quite a bit failure hangs after 20 seconds of installation.

'Temp' Solution:

v3.10.102363.531: Open primary network controller Adapter settings > manually Install the 'Service' from Comodo Folder and 'Install this driver software anyway' and update.
v3.12.111745.560: Even opening Download EXE with WinRAR and launching Setup 'EXE' manually' does the same cannot find resolution to this.
* UPDATING * after Installation + force install Protocol with/from v3.10.102363.531 will work, but it's pain fully slow + requires more than 3 reboots to be completed. Downloaded amount is more than 140MB from Comodo Servers.

----

And, if possible here's some really simplistic to code easy ups would be SO welcome:

#1:
Firewall 'Very High' / 'Custom' modes the popup window displaying:
'Allow this request'
'Block this request'
'Threat this application as ... []'

Could 'Allow' / 'Block' simply be made to buttons (single click) ? Since it's pain, if there's very restrict policy (Instead of select to 'Allow' or 'Block' and then confirm).

#2:
Subject 'Save Settings':

completely missing?

Would LOVE to export/import firewall rules list separately also whole program settings to hard drive or USB flash (doesn't mean whole program alone I need firewall settings specifically as many others I trust). As comodo when it crashes and occasionally loses firewall rules while installations.