Network Control Rule cannot only change the description (3.0.25.378 X32)

[Guest]

[Natori]

Network Control Rule cannot only change the description
click Apply button, the description message NOT changed.

Change the description must change other any setting together.

Sorry for my bad english.

[kail]

I confirm this (Network Security Policy - Application & Global Rule Description). Clicking on a tab will force CFP into realising the description has been changed.

[kail]

*UPDATE* XRef Topic

The above work-around method only works once. Any subsequent changes using that method do not work. So far, I can only get it to work by ticking or un-ticking the Log field to force the Description change on Apply. Not very satisfactory, since you need to re-edit the rule to put the Log field back to what is was in the first place just to change the Description of a rule.

[Touche]

WinXP SP2
Comodo v3.0.25.378 x32

Same problem. Workaround works, but it really should be fixed. Seems there are a lot of bugs regarding Application rules.

[fOrTy_7]

Network Control Rule cannot only change the description
click Apply button, the description message NOT changed.

Change the description must change other any setting together.

Sorry for my bad english.

This bug is more serious. It affect not only the description field, but also the destination port field. I didn't check other fields, but more might be affected.

[fOrTy_7]

This bug has been fixed in CIS beta3.

[Tags:]