Author Topic: Network Control Rule cannot only change the description (3.0.25.378 X32)  (Read 11783 times)

Offline BBeat

  • Comodo Loves me
  • ****
  • Posts: 106
Network Control Rule cannot only change the description
click Apply button, the description message NOT changed.

Change the description must change other any setting together.

Sorry for my bad english.
« Last Edit: June 13, 2008, 07:35:37 AM by Natori »
>My CIS Version: 7.0

>CIS "Active Connections" Windows
UDP Listen Port Come Back~ (UDP Port Software: ie.TFTP Server, UDP Port 69)
Please give me a choice to enable it... (In Firewall Behavior Settings)
>CIS6.1 Active Connections Windows hide Loopback connections & TCP Listen Port?

Offline kail

  • Mostly Benevolent
  • Global Moderator
  • Comodo's Hero
  • *****
  • Posts: 11277
  • The future is much like the present, only longer.
    • COMODO's free software!
I confirm this (Network Security Policy - Application & Global Rule Description). Clicking on a tab will force CFP into realising the description has been changed.
My System Details: W8Px64 with CIS 6, Firefox 26 & Becky! 2.65
Forum Policy.
____
The problem is not the problems, the problem is people's attitude towards those problems.

Offline kail

  • Mostly Benevolent
  • Global Moderator
  • Comodo's Hero
  • *****
  • Posts: 11277
  • The future is much like the present, only longer.
    • COMODO's free software!
*UPDATE* XRef Topic

The above work-around method only works once. Any subsequent changes using that method do not work. So far, I can only get it to work by ticking or un-ticking the Log field to force the Description change on Apply. Not very satisfactory, since you need to re-edit the rule to put the Log field back to what is was in the first place just to change the Description of a rule.

My System Details: W8Px64 with CIS 6, Firefox 26 & Becky! 2.65
Forum Policy.
____
The problem is not the problems, the problem is people's attitude towards those problems.

Offline Touche

  • Comodo Member
  • **
  • Posts: 34
WinXP SP2
Comodo v3.0.25.378 x32

Same problem. Workaround works, but it really should be fixed. Seems there are a lot of bugs regarding Application rules.

Offline fOrTy_7

  • Comodo's Hero
  • *****
  • Posts: 584
Network Control Rule cannot only change the description
click Apply button, the description message NOT changed.

Change the description must change other any setting together.

Sorry for my bad english.

This bug is more serious. It affect not only the description field, but also the destination port field. I didn't check other fields, but more might be affected.
« Last Edit: September 20, 2008, 03:08:06 PM by fOrTy_7 »
Windows 7 Pro 6.1.7601 x64 Service Pack 1
Comodo Internet Security 5.10.228257.2253
AV: Stateful, FW: Safe, D+: Safe, SB: Enabled

Offline fOrTy_7

  • Comodo's Hero
  • *****
  • Posts: 584
Network Control Rule cannot only change the description [FIXED]
« Reply #5 on: October 04, 2008, 03:29:39 AM »
This bug has been fixed in CIS beta3.
Windows 7 Pro 6.1.7601 x64 Service Pack 1
Comodo Internet Security 5.10.228257.2253
AV: Stateful, FW: Safe, D+: Safe, SB: Enabled

 

Seo4Smf 2.0 © SmfMod.Com | Smf Destek